AA68-03388A-00_eng_Chapter2 4/21/04 5:24 PM Page 22

IN S TA L L AT I O N

Connecting to DVI (Digital Visual Interface)

By inputting a high-bandwidth Digital Content Protection high-definition picture source to the DIGITAL INPUT jack on the TV, high-definition pictures can be displayed on the screen in their digital forms. (This DIGITAL INPUT jack is for use in the future when High-bandwidth Digital Content Protection DTV decoders, DVD players and D-VHS are put on the market.)

1

TV Rear Panel

Connect a coaxial cable to the ANTENNA IN terminal on the Set-Top Box and the antenna terminal on the TV.

2

Connect a set of audio cables between the DVI INPUT(AUDIO L, R) jacks on the TV and the AUDIO OUT jacks on the Set Top Box.

3

Connect a DVI cable between the DIGI-

TAL INPUT jack on the TV and the DVI

OUT jack on the Set Top Box.

Notes

•The DIGITAL INPUT jack can only be used with 1080i, 720p and 480p picture signals. Set the DTV decoder DIGITAL OUTPUT jack output setting to 1080i, 720p or 480p. For detailed information, refer to the Set Top Box instruction manual.

•The DIGITAL INPUT jack is not compatible with the picture signal of a personal computer.

•Use a DVI 25-pin cable (commercially available) in order to digitally connect the TV with a DTV Set-top box.

22