AA68-03388A-00_eng_Chapter2 4/21/04 5:24 PM Page 23

IN S TA L L AT I O N

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. (Also see “Viewing an External Signal Source” on page 44).

1

Locate the A/V output jacks on the cam- corder. They are usually found on the side or back of the camcorder.

2

Connect an audio cable between the AUDIO OUT jack on the camcorder and the AUDIO terminals on the TV.

3

Connect a video cable between the VIDEO OUT jack on the camcorder and the VIDEO(or S-VIDEO) terminal on the TV.

The audio-video cables shown here are usually included with a Camcorder.

(If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.

23