O P E R AT I O N
4
Press the … or † button to select antenna connection, then press the ENTER button.
When selecting the Cable TV system:
Press the … or † button to select “Cable”, then press the ENTER button.
Press the … or † button to cycle through these choices: “STD”, “HRC” or “IRC”, then press the ENTER button.
T V | Auto Program | ||
Select the antenna connection | |||
| ANT A | ANT B | |
| Air | None | |
| Cable | None | |
| Air | Cable |
|
| Cable | Air | |
|
|
|
|
|
|
|
|
T V | Auto Program | ||
Select the cable system
STD
HRC
IRC
Air | None |
|
|
Cable | None |
|
|
Air | Cable |
|
|
Cable | Air |
ANT A : Air
ANT A : Cable
ANT A : Air, ANT B : Cable
ANT A : Cable, ANT B : Air
Notes
•STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory”.
•Subscription cable services require
Storing Channels in Memory
5
Press the … or † button to select the antenna to memorize, then press the ENTER button.
The TV will begin memoriz- ing all of the available channels.
T V | Auto Program | |
| Adopts QAM for transmission | |
|
|
|
| Yes |
|
| No |
|
|
|
|
T V | Auto Program | ||
| Select the antennas to memorize | ||
| ANT A + ANT B |
|
|
| Start |
| |
| ANT A | Start |
|
| ANT B | Start |
|
|
|
|
|
6
Press the ENTER button when channel memorization is completed.
After pressing ENTER, it returns to the Channel menu.
Press the EXIT button to exit.
30
Auto Program
Channel Memory in Process
CATV Channel 15
Stop
Auto Program
Stop
16 channel were memorized Air(ANT A) : 7, Cable(ANT B) : 9
Return
▼ Press the ENTER button at any time to interrupt the memorization process and return to the Channel menu.
▼ Note: The TV must be connected to an antenna in order to receive digital TV signals.
Even if a particular channel is deleted from the memory, you can always tune to that channel directly by using the number buttons on the remote control.
▼ Note: When Receiving a Digital Cable
Signal : If your cable service signal does not comply with the ATSC(Advanced Television System Committee) requirements, this prod- uct may not operate properly.
