AA68-03388A-00_eng_Chapter2 4/21/04 5:24 PM Page 17

IN S TA L L AT I O N

4

Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the A/B switch.

5

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

6

Connect the last coaxial cable between the OUT terminal on the RF (A/B)

switch and the ANT A or ANT B terminal on the rear

of the TV.

After you’ve made this connection, set the A/B switch to the “A” position for normal view- ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

17