![](/images/backgrounds/361714/361714-0144x1.png)
Anynet+ (HDMI-CEC) Isn't Working
The problem |
| Try this! |
| |
|
| |||
| Confirm that the device is an Anynet+ device. The Anynet+ system supports | |||
| Anynet+ devices only. |
|
| |
| Check if the power cord of the Anynet+ device is properly connected. | |||
| Check the cable connections of the Anynet+ device. | |||
| Go to Anynet+ | System | Anynet+ | |
Anynet+ does not | Anynet+ |
| ||
work. | Check whether the TV remote control is in TV mode. | |||
| Check whether the remote control is Anynet+ compatible. | |||
| Anynet+ may not function when some other functions are active, including Channel | |||
| Search, Smart Hub, Plug & Play, etc. |
|
| |
| If you have disconnected and then reconnected the HDMI cable, scan for devices | |||
| again or turn your TV off and on. |
|
| |
|
| |||
I want to start | Check if the Anynet+ device is properly connected to the TV, and then select the | |||
Anynet+ | ||||
Anynet+. | ||||
Anynet+ |
|
| ||
|
|
| ||
|
|
| ||
I want to exit Anynet+. | Select View TV from the Anynet+ menu. |
| ||
Select a | ||||
| ||||
|
|
|
| |
The message |
|
|
| |
"Connecting to | You cannot use the remote control when you are configuring Anynet+ or switching | |||
Anynet+ device..." | ||||
to a viewing mode. Use the remote control after the TV has completed the Anynet+ | ||||
or "Disconnecting | ||||
configuration or has switched to a viewing mode. |
| |||
from Anynet+ device" |
| |||
|
|
| ||
appears on the screen. |
|
|
| |
|
|
|
| |
The Anynet+ device | You cannot use the play function when Setup is in progress. | |||
won't play. | ||||
|
|
| ||
|
|
| ||
| Check whether the device supports Anynet+. |
| ||
| Check whether the HDMI cable is properly connected. | |||
| Go to Anynet+ | System | Anynet+ | |
| Anynet+ |
| ||
The connected device | Scan for Anynet+ devices again. |
|
| |
is not displayed. | Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the | |||
| device is connected to your TV with an HDMI cable. Some HDMI cables may not | |||
| support Anynet+. |
|
| |
| If the connection is terminated because there has been a power failure or the HDMI | |||
| cable has been disconnected, please scan for the device again. | |||
|
| |||
The TV audio is not | Connect an optical cable to the TV and the receiver. | |||
ARC enables the TV to output digital sound via the HDMI (ARC) port. | ||||
being played through | ||||
However, ARC is only available when the TV is connected to an audio receiver that | ||||
the receiver. | ||||
supports ARC. |
|
| ||
|
|
| ||
|
|
|
|