Getting Started
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎Preset: Connecting the mains and antenna.
✎The position of power input port may differ depending on the model.
TV Rear Panel |
| VHF/UHF Antenna |
| Cable | |
|
|
or
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of
1 | Selecting a language |
2 | Selecting Store Demo or |
Home Use |
3 | Selecting an area. |
4 | Selecting a channel |
5 | Setting the clock |
6 | Enjoy your TV. |
Press the ▲ or ▼ button, then press the ENTEREbutton. | POWER |
Select the desired OSD (On Screen Display) language. | P |
Press the ◄ or ► button, then press the ENTEREbutton. | |
y Select the Home Use mode. Store Demo Mode is for retail | |
environments. |
y Return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When the OSD volume is displayed, press and hold MENU for 5 sec.
Press the ▲ or ▼ button, then press the ENTEREbutton. Select the appropriate area.
Press the ENTEREbutton, then the channel search will start automatically. For more information, refer to Channel → Auto Store. (P. 11)
✎Press the ENTEREbutton at any time to interrupt the memorisation process. Press the ◄ or ► button to select Month, Day, Year, Hour, Minute or am/pm.
Set these by pressing the ▲ or ▼ button.
Press the ENTEREbutton.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is
✎You should do Plug & Play (MENU → System) again at home although you did in shop.
✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to
Input Cables (Sold Separately)
HDMI | Component | Composite (AV) | Coaxial (RF) | |
|
|
|
|
|
Service
Connector for service only.
6 English