Samsung UA32C6900VMXXV, UA46C6900VMXXV, UA55C6900VMXXV, UA60C6900VMXXV Additional Setting, Sound Reset (OK / Cancel), Time, Setup Menu, Basic Features, ¦¦ Setting the Time, ¦¦ Using the Sleep Timer, ¦¦ Selecting the Sound Mode

Basic Features

Additional Setting

■■ DTV Audio Level (MPEG / HE-AAC) (digital channels only): This function allows you to reduce the disparity of a voice signal (which is one of the signals received during a digital TV broadcast) to a desired level.

✎✎ According to the type of broadcast signal, MPEG

/HE-AAC can be adjusted between -10dB and 0dB.

✎✎ To increase or decrease the volume, adjust between the range 0 and -10 respectively.

■■ SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.

Audio Format: During the reception of a digital TV broadcast, you can select the Digital Audio output (SPDIF) format from the options PCM or Dolby Digital.

✎✎ By connecting to 5.1ch speakers in a Dolby Digital setup, maximize your interactive 3D sound experience.

Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).

■■ Dolby Digital Comp (Line / RF) (digital channels only): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE- AAC, ATV Sound).

✎✎ Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.

Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.

RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

¦¦ Selecting the Sound Mode

When you set to Dual f-g, the current sound
mode is displayed on the screen.	DUAL
	DUAL

	Audio	Dual f-g	Default
	Type	Dual f-g	Default
	Type
A2	Mono	Mono	Automatic
A2	Stereo	Stereo  Mono	change
Stereo	Stereo	Stereo  Mono	change
Stereo	Dual	Dual f Dual g	Dual f
	Dual	Dual f Dual g	Dual f
	Mono	Mono	Automatic
NICAM	Stereo	Mono  Stereo	change
Stereo	Dual	Mono  Dual f	Dual f
	Dual	 Dual g	Dual f
		 Dual g

✎✎If the stereo signal is weak and an automatic switching occurs, then switch to the mono.

✎✎Only activated in stereo sound signal.

✎✎Only available when the Input source is set to TV.

Setup Menu

¦¦ Setting the Time

Time

■■ Clock: Setting the clock is for using various timer features of the TV.

OO The current time will appear every time you press the INFO button.

✎✎ If you disconnect the power cord, you have to set the clock again.

Clock Mode (Auto / Manual)

✎✎ Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.

✎✎ The antenna must be connected in order to set the time automatically.

✎✎ The displayed time may differ from the actual current time because the information is from the broadcasting station. To correct the time, change the mode to Manual.

Clock Set: Set the Day, Month, Year, Hour and Minute manually.

✎✎ Available only when Clock Mode is set to Manual.

¦¦ Using the Sleep Timer

■■ Sleep Timer t: Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes).

✎✎ To cancel Sleep Timer, select Off.

18 English