Samsung VCR8874T3B/XET manual Spot Cleaning, Time, the → is display on the display panel in turns

Operating the cleaner

USING THE ROBOTIC VACUUM CLEANER

SPOT CLEANING

You can conveniently clean a specific area that has a a lot of cookie crumbs, dust, and etc.

■Move the robotic vacuum cleaner to the location where you want to perform a spot clean.

About 1.5m

About 1.5m

Main unit button Remote control button Configuration Sequence

1 Set the mode.

X 2time

2 Cancel the mode.

Normal Mode

-In Spot cleaning mode, the robotic vacuum cleaner cleans an area with a length of 1.5m and a width of 1.5m.

-When cleaning is completed, the robotic vacuum cleaner will display End, Stop, and Stand by.

When the robotic vacuum cleaner is docked with the NOTE charger station, spot cleaning is not supported.

●When you press the Turbo remote control button, either On

Turbo Mode

CAUTION

turbo ( ) or Off turbo ( ) is displayed on the display panel in turns. When On turbo is displayed, you can clean the fl oor in Turbo Mode.

●When you press the Edge remote control button, On Edge

( ) or Off Edge ( ) is displayed on the display panel in turns. When On Edge is displayed, you can clean the fl oor in Edge Mode.

●If you select both Turbo Mode and Edge Mode at the same

time, the ( → ) is display on the display panel in turns.

Edge Mode

Cleaning Complete

30_ Operating the cleaner