Samsung Setting the Zero Memory (VP-D353(i)/D354(i)/D355(i) only)

4242
ENGLISH
Basic Recording
✤The ZERO MEMORYfunction works in both Camera and Player modes.
✤You can mark a point on a tape that you want to return to following playback.
1. Set the Power switch to CAMERAor PLAYER.
2. Set the Mode switch to TAPE.
3. Press the ZERO MEMORYbutton on the remote control before the recording or during playback
at the point where you wish to return.
■
The time code is changed to a tape counter that is set to ZERO MEMORYwith the
0:00:00 (ZERO MEMORY indicator).
■
If you want to cancel the ZERO MEMORYfunction, press the ZERO MEMORY button again.
4. Finding the zero position.
■
When you have finished playback, fast forward or rewind the tape in stop mode.
The tape stops automatically when it reaches the zero position.
■
When you have finished recording, set the Power switch to PLAYERand press
the (REW) button.
The tape stops automatically when it reaches the zero position.
5. The tape counter with the (ZERO MEMORYindicator) disappears from the display and the
tape counter is changed to the time code.
[ Notes ]
■
In the following situations, ZERO MEMORYmode may be canceled automatically:
-At the end of the section marked with the ZERO MEMORYfunction.
-When the tape is ejected.
-When you remove the Battery pack or power supply.
■
The ZERO MEMORYmay not function correctly where there is a break between recordings on the tape.
Setting the Zero Memory (VP-D353(i)/D354(i)/D355(i) only)
œ
1