ENGLISH
Basic Recording
Searching quickly for a desired scene (Setting the ZERO MEMORY)
✤The ZERO MEMORY function works in both <Camera> and <Player> modes. ➥page 19
✤You can mark a point on a tape that you want to return to following playback.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE].
1
3. Press the [ZERO MEMORY] button on the remote control before the recording or during playback at the point where you wish to return.
■ The time code is changed to a tape counter that is set to ZERO MEMORY with the < 
0:00:00> (ZERO MEMORY indicator).
■If you want to cancel the ZERO MEMORY function, press the [ZERO MEMORY] button
again.
4. Finding the zero position. | œ |
■ When you have finished playback, fast forward or rewind the tape in stop mode. | |
The tape stops automatically when it reaches the zero position. |
|
■When you have finished recording, set the [Power] switch to [PLAYER] and press the
[œœ (REW)] button.
The tape stops automatically when it reaches the zero position.
5.The tape counter with the < 
> (ZERO MEMORY indicator) disappears from the display and the tape counter is changed to the time code.
[ Notes ]
■In the following situations, ZERO MEMORY mode may be canceled automatically:
-At the end of the section marked with the ZERO MEMORY function.
-When the tape is ejected.
-When you remove the Battery Pack or power supply.
■The ZERO MEMORY may not function correctly where there is a break between recordings on the tape.
37
