Samsung VP-D375W ZERO MEMORY), MEMORY) (SC-D375(H)/D975only), Basic Recording, ENGLISH, SC-D375(H)/D975), [Mode], [TAPE], (REW)], [Power], [Power], 0:00:00, 0:00:00, [Power]

ENGLISH
Basic Recording
Searching quickly for a desired scene (Setting the ZERO				(		ZERO MEMORY)
MEMORY) (SC-D375(H)/D975 only)			SC-D375(H)/D975)
✤ The ZERO MEMORY function works in both <Camera> and <Player>		✤	<Camera> (	) <Player> (		)
modes. ➥page 19			➥	19
✤ You can mark a point on a tape that you want to return to following		✤
playback.
1. Set the [Power] switch to [CAMERA] or [PLAYER].			1.	[Power]		[CAMERA]
				[PLAYER]
	1
2. Set the [Mode] switch to [TAPE].				[Mode]		[TAPE]
3. Press the [ZERO MEMORY] button on the remote			2.
control before the recording or during playback at the			3.
point where you wish to return.				[ZERO MEMORY]
■ The time code is changed to a tape counter that is
set to ZERO MEMORY with the <	0:00:00>			■
				<	0:00:00>
(ZERO MEMORY indicator).
■ If you want to cancel the ZERO MEMORY function,				■
press the [ZERO MEMORY] button again.				[ZERO MEMORY]
4. Finding the zero position.			4.
■ When you have finished playback, fast forward or				■
rewind the tape in stop mode.
The tape stops automatically when it reaches the
zero position.		œ
■ When you have finished recording, set the [Power]				■		[Power]
switch to [PLAYER] and press the [œœ (REW)]
				[PLAYER]		[œœ (REW)]
button.
The tape stops automatically when it reaches the
zero position.			5.
5. The tape counter with the < > (ZERO MEMORY indicator) disappears
from the display and the tape counter is changed to the time code.
[ Notes ]		■
■ In the following situations, ZERO MEMORY mode may be canceled
automatically:

-At the end of the section marked with the ZERO MEMORY function.

-When the tape is ejected.

- When you remove the Battery Pack or power supply. ■

■The ZERO MEMORY may not function correctly where there is a break between recordings on the tape.

37