ENGLISH

USB Interface

USB

 

 

 

 

 

(SC-D375(H)/D975 only)

 

SC-D375(H)/D975

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Using the PC Camera Function

 

 

 

 

 

 

This function works only in <Camera> mode. page 19

<Camera> ( )

19

To use the PC Camera function, DV Driver, Video Codec and DirectX

 

,DV

,

 

9.0 programs must be installed in the PC.

 

DirectX 9.0

 

 

When you connect to a Web site that provides video chatting

 

 

 

 

 

 

 

functions, you can use your Camcorder to participate.

 

 

 

 

When using this camcorder for video conferencing (such as Net

Meeting), voice communication may not be supported depending on

(

),

the video conferencing software. In this case, connect an external

 

 

 

microphone to the soundcard of the PC to enable voice

 

 

 

 

communication.

 

 

 

 

Using the Camcorder with PC Net Meeting program installed, you

 

,

can participate in video conference.

 

 

 

 

The PC Camera's screen size (Transferred video frame rate for the

PC

PC

 

PC Camera function is max 15 fps.)

 

 

 

15 fps

 

 

- 640X480 (VGA) pixels for USB 2.0 connection.

 

 

 

If PC is connected with the USB to the Camcorder, only the [Power]

- USB 2.0

640X480 (VGA)

 

switch, [Mode] switch, [Zoom] lever can be

 

USB

 

operated.

1

 

 

[Power] , [Mode]

, [Zoom]

 

 

 

1. Set the [Power] switch to [CAMERA].

2. Set the [Mode] switch to [TAPE].

3. Connect one end of the USB cable to the USB jack

 

1.

[Power]

[CAMERA]

on the Camcorder and the other end to the USB

 

 

 

 

connector on your computer.

2

2.

[Mode]

[TAPE]

 

 

 

3.

USB

USB

97