ENGLISH
Preparation
Lithium Battery Installation
Lithium Battery Installation for theInternal Clock1. | Remove the Battery Pack from the rear of the | 1. | |
| Camcorder. |
| 2. |
2. | Open the Lithium Battery Cover on the rear of | 3. | |
| the Camcorder. |
|
|
3. | Position the Lithium Battery in the Lithium | 4. | |
| Battery Holder, with the positive ( | ) |
|
| terminal face up. |
|
|
| Be careful not to reverse the polarity of the |
| |
| Battery. |
|
|
4. | Close the Lithium Battery Cover. |
|
|
1. Pull out the Lithium Battery Holder toward the direction of the arrow.
2.Position the Lithium Battery in the Lithium Battery Holder, with the positive ( ) terminal face up.
3.Reinsert the Lithium Battery Holder.
Precaution regarding the Lithium Battery1.The Lithium Battery maintains the clock function and preset contents of the memory; even if the Battery Pack or AC Power adapter is removed.
2.The Lithium Battery for the Camcorder lasts about 6 months under normal operation from time of installation.
3.When the Lithium Battery becomes weak or dead, the date/time indicator will display <12:00 AM JAN. 1,2007> when you set the <Date/Time> to <On>. When this occurs, replace the Lithium Battery with a new one (type CR2025).
4.There is a danger of explosion if Battery is incorrectly replaced. Replace only with the same or equivalent type.
Warning: Keep the Lithium Battery out of reach of children. Should a battery be swallowed, consult a doctor immediately.
1.
2.
3.
1. |
|
|
2. |
| 6 |
3. | <Date/Time> | <On> |
<12:00 AM JAN. 1,2007>
(12:00 AM 1. 1,2007)CR2025
4.
15