ENGLISH DEUTSCH
25
Power Switch
Preparation

Connecting a Power Source

There are two types of power source that can be connected to your
DVD Camcorder.
- The AC Power adapter used for indoor recording.
- The Battery Pack: used for outdoor recording.

Using a Household Power Source

Connect to a household power source to use the DVD Camcorder
without having to worry about the battery power. You can keep the
Battery Pack attached; the battery power will not be consumed.
1. Connect the AC Power
adapter (AA-E9 TYPE) to a
wall socket.
The plug and wall socket
type may differ according to
your resident country.
2. Open the LCD Screen and
Jack Cover.
3. Connect the DC cable to
the DC IN jack of the DVD
Camcorder.
4. Set the DVD Camcorder to each mode by holding down the Green
Tab on the [Power] switch and turning it to [On] or [Off].
Vorbereitung

Stromversorgung herstellen

Der DVD-Camcorder kann auf zwei Arten mit Strom versorgt
werden:
- Für Innenaufnahmen können Sie den Camcorder über das
Netzteil an eine Steckdose anschließen.
- Akku: für Aufnahmen im Freien.

An Steckdose anschließen

Mit dem Anschluss an eine Steckdose können Sie den DVD-Camcorder
verwenden, ohne die Akkulaufzeit berücksichtigen zu müssen. Der
Akku kann angeschlossen bleiben und wird dabei nicht entladen.
1. Schließen Sie das Netzteil
(Typ AA-E9) an eine
Steckdose an.
Stecker und Steckdose
können sich von Land zu
Land unterscheiden.
2. Öffnen Sie das Display und
die Anschlussabdeckung.
3. Verbinden Sie das
Anschlusskabel des
Netzteils mit dem
Netzteilanschluss DC IN des
DVD-Camcorders.
4. Zum Einstellen der verschiedenen Modi halten Sie die grüne Taste
auf dem Betriebsart-Wähler gedrückt und drehen ihn auf Position
[On] oder [Off].