ENGLISH DEUTSCH
35
4
Move OK Select
MENU
Exit
Camera Mode
►System
Clock Set
Remote
Beep Sound
Language
Demonstration
►On
►On
►English
►On
6
Move OK Select
MENU
Exit
Off
On
Camera Mode
►System
Clock Set
Remote
Beep Sound
Language
Demonstration
7
SAMSUNG Camcorder is ...
[Digital Camcorder]
Demonstration
Initial Setting : System Menu Setting
Viewing the Demonstration (Demonstration)
The Demonstration function may only be used in the Camera
Mode with no disc inserted in the unit. page 26
Before you begin: Make sure that there is no disc inserted in the
DVD Camcorder. page 40
Demonstration automatically shows you the major functions that
are included with your DVD Camcorder so that you may use them
more easily.
The Demonstration operates repeatedly until it
is switched off.
1. Set the [Mode] switch to [DISC].
(VP-DC163(i)/DC165W(i)/DC165WB(i) only)
2. Set the [Power] switch to [ (Camera)].
3. Press the [MENU] button.
The menu list will appear.
4. Move the [Joystick] up or down to select
<System>, then press the [Joystick(OK)].
5. Move the [Joystick] up or down to
select <Demonstration>, then press the
[Joystick(OK)].
6. Move the [Joystick] up or down to select
<On>, then press the [Joystick(OK)].
7. Press the [MENU] button.
The Demonstration will begin.
8. To quit the Demonstration, press the [MENU]
button.
Note
When you press FADE, BLC, EASY.Q, MF/AF, or
COLOR NITE button during the Demonstration
operation, the Demonstration function will be
deactivated and the function of the button pressed
will be activated.
Voreinstellungen: Menü ‘System’ verwenden
Demo-Funktion verwenden (Demo-Funktion)
Die Funktion Demo-Funktion kann nur im Cam-Modus verwendet
werden, wenn keine Disk in den Camcorder eingelegt ist. Seite 26
Vor dem Start: Stellen Sie sicher, dass sich keine Disk im DVD-
Camcorder befindet. Seite 40
Die Demo-Funktion bietet Ihnen einen automatischen Überblick über
die wichtigsten Funktionen des DVD-Camcorders. Sie soll Ihnen die
Bedienung des Geräts erleichtern.
Die Demonstration wird so lange wiederholt, bis
Sie die Demo-Funktion wieder ausschalten.
1. Stellen Sie den Moduswahlschalter auf
[DISC] oder [CARD].
(Nur VP-DC163(i)/DC165W(i)/DC165WB(i))
2. Stellen Sie den Betriebsart-Wähler auf
[ (Camera)].
3. Drücken Sie die Taste [MENU].
Das Menü wird angezeigt.
4. Wählen Sie mit dem [Joystick] den Menüpunkt
<System> aus. Drücken Sie anschließend den
[Joystick(OK)].
5.
Wählen Sie mit dem [Joystick] den Menüpunkt
<Demonstration> (Demo-Funktion) aus.
Drücken Sie anschließend den [Joystick(OK)].
6. Wählen Sie mit dem [Joystick] den Menüpunkt
<On> (Ein) aus. Drücken Sie anschließend den
[Joystick(OK)].
7. Drücken Sie die Taste [MENU].
�� Daraufhin beginnt die Demonstration.
8. Drücken Sie die Taste [MENU], um die
Demonstration zu beenden.
Hinweis
Wenn Sie die Tasten FADE, BLC, EASY.Q, MF/AF
oder COLOR NITE während der Demonstration
drücken, wird die Demonstrationsfunktion
deaktiviert und die Funktion der gedrückten Taste
aktiviert.