AAConnecting the Cover-Stand

1Before attaching the Cover-Stand,

remove the rear cover. Insert the power cable through the Cover-Stand hole into the M7 power

port.

2The inside of the Cover-Stand has two sides. One side (A) has four tabs - two large tabs and two small tabs. The other side (B) has two large tabs only. Insert the two large tabs on side A into the two slots in the area marked A in the diagram.

3Turn the M7 so the side marked B in the diagram is facing you. With the thumbs of both hands, press side B of the Cover-Stand so that the tabs on side B snap into the slots in the area marked B in the diagram. You may need to press side B of the Cover- Stand with some force.

4The M7 can now be installed vertically.

A

B

Caution

99Do not place the M7 on an unstable surface.

184444

Page 18
Image 18
Samsung WAM750 user manual AA Connecting the Cover-Stand