Samsung WAM750 user manual Adding another M7 and Hub to a single M7 in use

Models: WAM750

1 86
Download 86 pages 42.3 Kb
Page 41
Image 41

Adding another M7 and Hub to a single M7 in use

`` When the M7 in use is connected to the router with a LAN cable

1Disconnect the LAN cable from the M7 in use.

2Connect the HUB to the wireless router with the LAN cable, and then plug in the HUB's power cable.

3Plug in the power cable of the new M7. The new M7's blue LED pairing indicator starts to flash. Wait until the pairing indicator on the M7 stops flashing. When the indicator stops flashing, pairing is complete. The M7 may also beep.

4Turn off the old M7 by disconnecting the power cable. Then. connect it again. Press the SPK ADD button on the back of the M7. The M7's blue LED pairing indicator starts to flash. Wait until the pairing indicator on the M7 stops flashing. When the indicator stops flashing, pairing is complete. The M7 may also beep.

5On your smart device, select the Samsung Multiroom app. Setup starts.

44144

Page 41
Image 41
Samsung WAM750 user manual Adding another M7 and Hub to a single M7 in use