calibrating your washing machine

CALIBRATION MODE

Samsung washing machine detects the laundry weight automatically. For more accurate weight detection, please run Calibration Mode after the installation. Calibration mode is done by following the steps below.

1.Remove laundry or any contents in the machine and turn off the machine.

2.Press the Temp button and Delay End button simultaneously, and press the Power button in addition. Then the machine turns on.

3.Press the Start button to activate “Calibration Mode”.

4.The drum rotates clockwise and counterclockwise approximately for 3 minutes.

5.When “Calibration Mode” is fi nished, “End/Cycle is complete” appears on the display, and the machine automatically turns off. The washing machine is now ready for use.

English - 37

MACHINE WASHING YOUR CALIBRATING 06

ARNO_DC68-03165H-09_EN.indd Sec8:37

2015-10-21 ￿￿ 5:47:43