MP3 Encoding

1 Connect the Audio Output port on the external audio source (or the Line Out port) to the ENC port on the device with the Line cable.

2

Slide the

switch to the ENC position begin MP3 encoding.

REC/ENC

3 REC/ENC

Slide the switch to the REC position while recording to stop

the encoding, and a new encoding file will be created.

●Recording will take place in the order of L001, L002, L003… . When the recording is finished, the files will be saved as MP3 files.

Note :

●Bit Rates can be set within the range of 32Kbps~128Kbps.

●To pause during Encoding, press the button. Press the button once again to recommence recording.

●Volume can be adjusted from level 0 to 10 while monitoring the Encoding.

Notice :

●Do not disconnect the Line cable during Encoding.

●If the battery is not charged enough, encoding will not be done.

●Adjust the volume of the external audio source to a suitable level and encode it. If the volume level is extremely high, the sound quality may not be good.

36

37