Message function
The message function can record and playback with 2 sets of voice message for 30 seconds each.
1. Press and hold the Message button to record the voice up to 30 seconds length. The LED is lighted during recording and the display will show “RECORD”. Press and release the Message button to pause the recording. After recording the LED will start flashing.
2.Press and release the Message button to playback the voice content, and the display will show “PLAYING”. Press the message button to pause the message while it is being playback. The LED will stop flashing after message is played.
3.To overwrite an existing message, press and hold the Message button for 2 seconds to start recording a new message.
4.This Message button can operate in power on or off mode. In power on mode the receiver even in AM or FM as well as
25
