Sangean Electronics K-200 manual Setting the alarm clock

Setting the alarm clock

Your K-200 radio has two alarms which can each be set to wake you to AM/FM radio, buzzer alarm or voice messages. The alarms may be set while the unit is in standby mode or while playing.

1.Before setting an alarm ensure that the clock time is set. Press and hold the Alarm 1 button to enter the alarm 1 setting.

2.The hour setting of alarm 1 will begin to flash. Rotate the Tuning control to select the required alarm hour, and press and release the Tuning control to confirm the setting. Rotate the Tuning control to select the required alarm minute, and press and release the Tuning control to confirm the setting.

3.Then the display will show the frequency options for the alarm. The alarm options are as follows:

ONCE – the alarm will sound once DAILY – the alarm will sound everyday WEEKDAYS – the alarm will sound only on weekdays WEEKENDS – the alarm will sound only at weekends

Press the Tuning control to confirm the setting. If you choose to set the alarm to Once you will also need to set the time using the Tuning control.

19