Sangean Electronics K-200 manual Clock and Alarms, Setting the time format

Clock and Alarms

Setting the time format

The clock display used in stand-by mode and on the playing mode screens can be set to 12 or 24 hour format. The selected format is then also used when setting the alarms.

1.Make sure your radio is in power off mode.

2.Press and hold the Tuning control knob until the radio beeps twice

and the setting of time format begins to flash. 2,3

3. Rotate the Tuning control to select either 12 or 24 hour format. Press and release the Tuning control to confirm your choice of clock format. The display will then revert to the previous menu.

If the 12 hour clock format is chosen, the radio will then use the 12 hour clock for the setting of alarms, and will display a 12 hour clock for the setting of alarms, and will display a 12 hour clock with a PM indicator when in stand-by mode.

GB

16