Backed by CLO | Sanus Systems LA112 instruction

LA112

(6901-100189 <01>)

Backed by CLO

Thank you for choosing the Sanus Systems LA112 motorized mount. The LA112 is a remote-controlled automated mount for flat panel monitors designed to be fully adjustable. The LA112 supports flat panel monitors with a maximum weight of 81 kg (180 lbs.), ranging in size from 40 in. – 63 in. (102 cm – 106 cm). The LA112 extends up to 12 in (30 cm) from the wall.

CauTION

Do not use this product for any purpose not explicitly specified by Sanus Systems. Improper installation may cause property damage or personal injury. If you do not understand these directions, or have doubts about the safety of the installation, contact Sanus Systems Customer Service or call a qualified contractor. Sanus Systems is not liable for damage or injury caused by incorrect mounting, assembly, or use.

Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 USA

Customer Service: 1-800-359-5520 • info@sanus.com • www.sanus.com

Image 1

Sanus Systems LA112 manual Backed by CLO

Contents

Backed by CLO LA112 Measure width between holes Supplied Parts and HardwareMeasure height between holes 05 x 06 x 07 x 01 x 02 x 04 x10 x 11 x 12 x 08 x 14 x 6901-100189 Remove Wall Plate from Arm Remove Mounting Brackets For Wood Stud Walls Mount Wall PlateMin .5 cm 2.5 For Concrete Block or Brick Walls Install Arm Assembly to Wall Plate Selector Set Set the Monitor Width Top Install Mounting Brackets18, 19 12, 13, 14, 15, 16 21, 22 Route Cables For Power Outlets Located Outside the Bellows For Power Outlets Located Inside the Bellows Install Monitor to Wall Plate Adjust Monitor Position Reset the LA112 Home PositionCalibrate the Arm Calibrate Arm to the Monitor CBL mode Page Up Using the Remote Control Press Programming the Preset Position Keys Programming the Remote to Operate an Existing TV TV Programming Codes Programming CodesTV Brand Code Numbers SSS NECTMK RCA DVD Brand Code Numbers DVD Programming CodesJVC KLH VCR Brand Code Numbers VCR Programming Codes STS Teac Brand Code Numbers For Cable Boxes How to Correct TroubleshootingArm Will Not Move A1,A2, or A3 is displayed on control box C1,C2,C3 or C4 is displayed on control box Power Switch Control Box LED Display Selector Set Button HC is displayed on control box H1,H2, or H3 is displayed on control box If Your TV Leans Forward at the Home Position Maintenance Home Automation Controls Purchaser Information WarrantyProduct Information To register by mail