![](/images/new-backgrounds/1321481/32148135x1.webp)
+ SEL
IN/OUT
Programming the Remote to Operate an Existing TV
1. Turn your TV on.
2. Find your TV’s codes from the list on the following page.
3. Press and hold TVuntil the TV button stays lit.
4. Point the remote at your TV and enter a code from the list. Keep entering codes until the TV powers off.
5. Press | SEL | The TV button will blink 3 times and go out. | |
IN/OUT | |||
|
|
6. Test that the remote works properly with your TV. If not, repeat steps
P R E S E T
POWER
VCR
TV DVD
SET
P1
SEL
IN/OUT
P2
MENU
CBL
P3 | P | |
R | ||
| ||
| E | |
| S | |
| E | |
P4 | T |
EXIT
+ MUTE +
VOLCH
FAV
NOTE: To program the remote control to operate your DVD player, VCR and cable box, follow the above steps replacing “TV” for the appropriate device. The following pages list TV, DVD player, VCR and cable box codes.