For Concrete Block or Brick Walls | Sanus Systems LA112 specs

For Concrete Block or Brick Walls

1/2 in.

[01]

Min. 6.5 cm (2.5 in.)

6x

[10]

6x

6x

[11]

6x

CauTION

Avoid potential injuries and / or property damage! Never drill into the mortar between concrete blocks!

6901-100189 <01>

Image 8

Sanus Systems LA112 manual For Concrete Block or Brick Walls

Contents

LA112 Backed by CLO Measure height between holes Supplied Parts and HardwareMeasure width between holes 01 x 02 x 04 x 05 x 06 x 07 x10 x 11 x 12 x 08 x 14 x 6901-100189 Remove Wall Plate from Arm Remove Mounting Brackets Min .5 cm 2.5 Mount Wall PlateFor Wood Stud Walls For Concrete Block or Brick Walls Install Arm Assembly to Wall Plate Set the Monitor Width Selector Set 18, 19 12, 13, 14, 15, 16 21, 22 Install Mounting BracketsTop For Power Outlets Located Outside the Bellows Route Cables For Power Outlets Located Inside the Bellows Install Monitor to Wall Plate Reset the LA112 Home Position Adjust Monitor PositionCalibrate the Arm Calibrate Arm to the Monitor Using the Remote Control CBL mode Page Up Programming the Preset Position Keys Press Programming the Remote to Operate an Existing TV TV Brand Code Numbers Programming CodesTV Programming Codes NEC SSSTMK RCA DVD Programming Codes DVD Brand Code NumbersJVC KLH VCR Programming Codes VCR Brand Code Numbers Teac STS For Cable Boxes Brand Code Numbers Troubleshooting How to CorrectArm Will Not Move A1,A2, or A3 is displayed on control box Power Switch Control Box LED Display Selector Set Button C1,C2,C3 or C4 is displayed on control box HC is displayed on control box H1,H2, or H3 is displayed on control box Maintenance If Your TV Leans Forward at the Home Position Home Automation Controls Warranty Purchaser InformationProduct Information To register by mail