SETTINGS MENU (Continued)
Setup
Unit name
You may assign a name to your handset. Default is "HANDSET" and the number registered to the base.
Press | To |
MENU | enter MENU |
| |
| scroll to SETUP |
MENU | enter SETUP |
MENU | enter UNIT NAME |
SETTINGS MENU (Continued)
Setup (continued)
Auto talk
You may choose if the handset will auto answer a call or not when you lift it from the base. Default is OFF.
Press | To |
MENU | enter MENU |
scroll to SETUP
MENU | enter SETUP |
key | input a name (up to 8 characters), use | MUTE | to delete a character if necessary |
CLEAR | |||
MENU | confirm |
|
|
| exit |
|
|
After completion you will see the name in the display. For example ALICE. The display will show “ALICE 1” where “1” is the handset number registered in the base.
MENU
MENU
scroll to AUTO TALK
enter AUTO TALK
select ON or OFF
confirm
exit
Backlight time
You may select how long the backlight will stay lit (5 - 20 seconds). Default is 10 seconds.
Press | To |
MENU | enter MENU |
scroll to SETUP
MENU | enter SETUP |
Flash Time
Depending on the telephone system, you may need to change the Flash time to match the system. There are 3 FLASH TIME built into this telephone: SHORT (100ms), MEDIUM (300ms), LONG (600ms). Default is LONG (600ms).
Press | To |
MENU | enter MENU |
scroll to SETUP
MENU
scroll to BACKLIGHT TIME
select BACKLIGHT TIME, the display will show “10 SECOND”
MENU | enter SETUP |
scroll to FLASH TIME
select 5 - 20 seconds
confirm
MENU
MENU
enter FLASH TIME
select SHORT, MEDIUM, or LONG
exit
Area code
You may set the area code to your telephone.
Press | To |
MENU | enter MENU |
| scroll to SETUP |
MENU | enter SETUP |
| scroll to AREA CODE |
MENU | select AREA CODE |
key | input code number, use MUTE to delete a number if necessary |
CLEAR | |
MENU | confirm |
| exit |
confirm
MENU
exit
NOTE: If you are too far away from the base or the base is off, the Set Flash Time may not succeed.
You will hear an error tone and the display will show "ERROR". Press 
to exit.
Language
There are 3 display languages built into this telephone. They are English, French, and Spanish. Default is English.
Press | To |
MENU | enter MENU |
scroll to SETUP
MENU | enter SETUP |
NOTE: when area code is programmed, the area code will not be included in the telephone number shown in the display if the incoming call is from the same area.
MENU
scroll to LANGUAGE
enter LANGUAGE
scroll to the language you want to display
Dial mode
Please refer to page 12.
25
confirm
MENU
exit
26
