REPLACE THE BATTERY (Continued)
To replace the battery
Make sure the telephone is off before replacing the battery.
1.Slide off the battery compartment cover
2.Remove the battery pack from the compartment
3.Insert the new battery pack according to the battery contacts location
4.Slide on the battery compartment cover
5.Place handset on the base to charge for 15 hours
NOTE:
Charge the handset battery for at least 15 hours continuously prior to first use. The initial charge is important for best performance.
After battery replacement, reset the date and time.
Battery and handset may become warm during charging. This is normal.
Warning:
To avoid the risk of personal injury or property damage from fire or electrical shock, only use 2.4V 600mAh rechargeable battery pack.
Replacement part number
RECYCLING NICKEL-METAL HYDRIDE BATTERIES
OF PROPERLY.
Please take your used battery pack to a store that recycles
POWER FAILURE
During the period that the power is off, you will not be able to make or receive calls with the telephone.
HEADSET JACK
Headset connection (Headset not included)
For hands free conversation, connect the headset (not included) to the HEADSET jack. The handset earpiece and microphone are disabled when the headset is connected.
For purchasing, servicing or replacement please contact our service center. SANYO Canada Inc.
Concord, Ont. L4K 5C7
(905)
DEFAULT SETTING
Setting default value |
|
Language | English |
|
|
Unit name | Handset |
|
|
Backlight time | 10 seconds |
|
|
Area code | _ |
Dial mode | Tone |
Auto talk | Off |
Flash time | Long (600mS) |
Contrast | level 4 |
Time format | |
HS ringer music | 01 |
HS ringer volume | level 5 |
Page tone | 04 |
Key tone | Tone |
No disturb | Off |
Alarm | Off |
|
|
|
|
NOTE: If you are too far away from the base or the base is off, the Set Default may not succeed.
You will hear an error tone and the display will show "ERROR". Press
to exit.
35 | 36 | ||
|
|
|
|
|
|
|
|
