Sanyo CLT-D6223, CLT-D6222 Maximize Battery Performance, Replace The Battery, Delete All

Models: CLT-D6220

1 22
Download 22 pages 54.88 Kb
Page 18
Image 18
Call log options (continued)

SETTINGS MENU (Continued)

Call log options (continued)

Delete Record

This will delete the telephone number in the log.

When you are reviewing the Missed Call, Received Call, or Dialed Call:

Press

To

MENU

enter CALL LOG OPTION

 

select DELETE

MENU

confirm, the display will show next call

 

exit

Delete All

This will delete all telephone numbers in the log.

When you are reviewing the Missed Call, Received Call, or Dialed Call:

Press

To

MENU

enter CALL LOG OPTION

 

select DELETE ALL

MENU

enter DELETE ALL, the display will show "CONFIRM"

MENU

confirm, the display will show "EMPTY"

 

exit

NOTE:

When you are reviewing a number in either MISSED CALL, RECEIVED CALL or DIALED CALL,

press Delete All will dial out the number.

If you answer a call before the second ring, the Caller ID message may not appear.

When the call is from a private branch exchange, the caller's phone number and name may not appear.

When the Caller ID memory is full, new call information will replace the oldest call information automatically.

If you receive a repeated call with the same number, the unit will keep the last call information.

MAXIMIZE BATTERY PERFORMANCE

The freedom that your telephone can offer is fully dependent on the performance of the rechargeable battery in the handset. To maximize the battery performance, follow these guidelines:

Charge it for full 15 hours

Before initial use of your new battery, charge it for 15 hours continuously. The proper initial charging is very important to maximize the battery performance.

Keep the contacts clean

You can never fully recharge the battery if the contacts are dirty. Clean all the contacts - two at the bottom of the handset and two in the base cradle - periodically using a soft cloth.

Do not replace the handset in the base after each call

Repeatedly short charging creates a memory effect in the battery. Once a rechargeable battery acquires this "short memory", it sends a "low battery" signal even when it is almost fully charged. The battery then needs to be charged frequently. To avoid this, leave the handset out of the cradle until it really needs recharging.

Refresh the battery

If your battery seems to need recharging more often than usual, it may have lost part of its charging capacity because of premature recharges. To bring back its full capacity, try "refreshing" the battery:

1.

First discharge the battery by leaving the handset in TALK mode until Battery icon

is

 

empty.

 

 

(Disconnect the base from the telephone line, so that your line is not busy all the time).

 

2.

Then charge it for 15 continuous hours.

 

3.

Repeat the above once more.

 

REPLACE THE BATTERY

Battery replacement and handling

When the operating time becomes short even after the battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

For a replacement battery, please contact your place of purchase or fill out and mail the enclosed form.

33

34

 

 

 

 

 

 

 

 

Page 18
Image 18
Sanyo CLT-D6223 Maximize Battery Performance, Replace The Battery, Call log options continued Delete Record, Delete All