Sanyo DP26648 Installation, Getting Started, Positioning the LCD Hdtv, Wall Mounting Optional

INSTALLATION

POSITIONING THE LCD HDTV

Always use a firm-flat surface when posi- tioning your HDTV. Do not position the unit in a confined area. Allow adequate space for proper ventilation.

DP26648

(DP32648)

GETTING STARTED

1Install supplied batteries in the Remote. (2 ”AAA” eneloop Ni-MHrechargeable batteries)

PRECAUTIONS

Do not use rechargeables together with dry cells, other types, mixed new and old, or batteries with different charge levels.

Do not expose the Remote or batteries to moisture or heat.

Match the “+” and “–” signs on the batteries with marks inside the Remote Control.

For eneloop battery recharging, please refer to your battery charger’s instructions (battery charger not included).

Please recycle used up rechargeable batteries.

For more information visit: www.eneloopusa.com

NOTE: All dimensions are in inches.

2Antenna Connection for off-air signals

ANALOG / DIGITAL

WALL MOUNTING (OPTIONAL)

Use the screws that are threaded into the stand- mounting inserts on the back of your HDTV to secure it to a wall mounting kit.

NOTE:Wall Mounting kit is not supplied.

ANTENNA

OR

CABLE

ANTENNA IN

VESA standard interface: 200 x 200

Wall Mounting

Inserts

Mounting screws measurements:

M6 Diameter, Length—12mm (min.) 16mm (max.)

THE TUNER IN THIS HDTV CAN RECEIVE:

a. Digital and Analog off-air signals from an antenna.

OR

b. Analog or ClearQAM cable channels from a direct Cable TV connection.

NOTES: You must use the on-screen MENU to Search for ClearQAM Cable channels. (See page 12.)

For the best picture, connect your Cable box or Satellite receiver to HDMI1, 2, or compo- nent jacks (Video2 or 3).

This HDTV can receive ANY unscrambled RF signal being broadcast.

Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032 5