Alarm Recording, Alarm recording, Set alarm recording | Sanyo DSR-M

4

ALARM RECORDING

ALARM indicator

Alarm recording

Use the following procedure to have alarm video recorded when an alarm signal is received during recording or recording stop.

zCheck that the device required for alarm recording is connected to the ALARM terminal. (JP.8)

1 Set alarm recording.

The default settings are shown below. See P.29 for how to change these settings.

zALARM MODE: “OFF”

Alarm recording is not performed.

zALARM DURATION: “20SEC”

Recording is performed for approximately 20 seconds for each alarm signal received.

2 When alarm input is detected.

HI	A 120H	Counts number of
20-05-04 AL	00015
08:30:35 ----------		alarms.

zWhen an alarm is received, “AL” flashes in the operation display area, the ALARM indicator flashes, and the alarm recording starts.

zThe latest 49,999 incidents are stored in the alarm history. Older incidents are erased.

3 Ending alarm recording.

When the alarm duration time (default setting: 20 seconds) ends, “AL” disappears from the operation display, the ALARM indicator stops flashing, and recording ends.

zWhen the hard disk’s remaining space for recording reaches zero, the FULL indicator lights and recording ends. You can start recording from the beginning again by changing the recording setting. (JP.29)

The following restrictions apply to alarm recording.

(1)Just after recording starts (STOP→REC/STOP indicator lights).

(2)After making “PICTURE QUALITY” or “AUDIO RECORDING” menu settings and returning to the camera screen.

For (1) and (2):

z Alarm input is not recognized for a maximum of 4 seconds. Alarm input after the 4 seconds are recognized as usual.

z Recording does not start for a maximum of 6 seconds regardless of alarm input.

(3)Just after recording finishes (the REC/STOP indicator turns off).

z Alarm input is not recognized for a maximum of 5 seconds. Alarm input after the 5 seconds are recognized as usual.

z Recording does not start for a maximum of 10 seconds regardless of alarm input.

English

15

Image 16

Sanyo DSR-M Alarm Recording, Alarm recording, Set alarm recording, When alarm input is detected, Ending alarm recording

Contents

Page Precaution ServiceLocation Avoiding Electrical Shock and Fire Power cord Ferrite core Power cord tie Application softwareFor LAN connection cable/ DVR power cord Introduction Contents Contents Settings Other Before USE Installation conditionsHard disk and cooling fan are consumables Backup battery For important recordingsHard disk protection Care Names and Functions of Parts Front panel Power cord holder ALL Reset switchRear panel Cord tie Installation and Connections Connecting a remote control circuitBasic connections System controller connections Connecting to a network Connecting cables to the control and alarm terminalsConnecting the power cord Screen Display and Position Operation display areaChanging the position of the operating display Example Normal screen Setting the LANGUAGE/CLOCK When you have made a selection, press ButtonTo change the language Press the Menu button Setting the LANGUAGE/CLOCK Setting the timeExample Setting 20 May, 2004, 830 AM Press the or button to select Press the button Timer recording Normal RECORDING/TIMER RecordingNormal recording Alarm Recording Alarm recordingSet alarm recording When alarm input is detected Playback Playback while fast-forwarding/rewinding Viewing still images Frame advance reverseDuring playback, press the Still button Press the Still button Alarm search Check that Alarm Search is Selected, and press the buttonSearching for Recorded Images Image to search Search in Search screen Enter the desired alarm number You can also search by specifying the desired alarm numberDate/time search Press the or button to select the image to play back Searching for Recorded Images Press the button, and set the date/time to searchPress the button to select View Then press the button If no image exists for the specified time Copying image Preview Copying to CF Cards or CD-R/RW Discs and Formatting Formatting a CompactFlash card orCD-RW Press the and buttons to select Copy START, and then press Setting the key lock function Releasing the key lock function Menu Configuration and Operations To restore menu setting items to their initial valuesDisplaying the menu screen and sub- menu screens Press the or button to select the desired menu Overview of sub-menus Menu Configuration and OperationsHDD SET JP.46 Summer Time SET settings Press the or button to change the settingSelect 1. LANGUAGE/CLOCK SET Press the button USE flashes When USE is selected for Mode under EXT.CLOCK SET settings1st DVR 2nd DVR Switch DVR DVR DVR DVR REC Mode SET REC Mode SET setting items Settings Starting recording again when Full indicator lightsSelect 2. REC Mode SET, and press Button Press the or button to select YES, then press the button Timer REC SET Timer setting itemsSelect 3. Timer REC SET, and press Button Press the button once Timer REC SET To cancel all timer reservationsTimer reservations spanning more than 24 hours Press the button to move the cursor to the next item Setting holidays DISPLAY/BUZZER SET setting items DISPLAY/BUZZER SET Select 4. DISPLAY/BUZZER SET, Press the button Press the and buttons to change the setting, then pressDISPLAY/BUZZER SET screen appears Password setting example Password settingSetting passwords Security Lock SET Setting the user password Security Lock SET Admin or User Press the and buttons to moveCursor to REC Control Lights, and the security lock is set Network connections and settings Settings for PC or network connectionRS-485/NETWORK SET Select 6.RS-485/NETWORK/REMOTE SET and press the button RS-485 connections and settings Select 6. RS-485/NETWORK/REMOTE SET, and press the button Setting Remote SET Disable flashes Select 7. Power LOSS/USED Time Press the button Power LOSS/USED TimeDisplays the total amount of disk 1 operation time Menu UPLOAD/DOWNLOAD OperationsSelect 8. Menu Upload DOWNLOAD, and press the button Menu button Button button „ If Mirroring setting is loaded Press the and buttons to select YES and press the buttonTo save menu items to CompactFlash card No flashes Formatting CompactFlash cards To exit Initializing the hard disk HDD SETSelect 9. HDD SET, and press Button Hard disk setting screen Setting conditionsAdding a hard disk RS-485 specifications RS-485 termination switch settings DVR/VCR command table Specifications PAL Dimensions Unit mm 210 Front 391.5 Side Index Timer button Timer indicator Timer recordingTV System selector switch UP button Index