Sanyo DSR-M manual Setting Remote SET, Disable flashes

6 RS-485/NETWORK SET

[Settings] (‹ indicates default setting.)

	Item	Setting	Description
	REMOTE AS	VCR	When the digital video recorder is operated
			from a controller, sets it to operate as a
(1)			VCR. Use VCR when using VSP-7000.
		‹ DVR	When the digital video recorder is operated
			from a controller, sets it to operate as a
			digital video recorder.
(2)	DATA SPEED		Used to select the communication speed.
			Selections: 19200/2400/4800/9600
(3)	STATUS INFO	ON	Status information is sent.
		‹ OFF	Status information is not sent.
(4)	ALARM INFO	ON	Alarm information is sent.
		‹ OFF	Alarm information is not sent.
	ADDRESS*		Set the digital video recorder’s address
(5)			when using RS-485.
			Setting range: 000 to 127

3 Press the [ ] and [ ] buttons to select

the desired item, then press the [ ] button.

4 Press the [ ] and [ ] buttons to change the setting, then press the

[ ] button.

5 Use the same procedure to set the other items as needed.

6 Press the [EXIT/OSD] button.

The display returns to the normal screen.

Setting REMOTE SET

Use the following procedure to specify whether or not recording is to be stopped when the [REC] button on the separately-sold VA-RMN01 wired remote controller is pressed. When a setting of “ENABLE” has been made, the remote controller's [REC] button can be pressed for 2 seconds or longer to stop recording.

zRegardless of this setting, if the [REC] button is pressed and released quickly (i.e., within 2 seconds), recording will be started.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> screen appears.

Select “6.RS-485/NETWORK/REMOTE SET” and press

the [ ] button.

The <RS-485/NETWORK/REMOTE SET> screen appears.

2 Press the [ ] and [ ] buttons to select

“REC STOP” and press the [ ] button.

“DISABLE” flashes.

3 Press the [ ] and [ ] buttons to change the setting, then press the

[ ] button.

[Settings] (‹ indicates initial setting.)

Setting	Description
‹DISABLE	Recording will not be stopped when the remote
	controller’s [REC] button is pressed.
ENABLE	Recording will be stopped when the remote
	controller’s [REC] button is pressed for at least
	2 seconds.

4 Press the [EXIT/OSD] button.

The display returns to the normal screen.

English 41