Sanyo DSR-M manual RS-485 connections and settings

6 RS-485/NETWORK SET

3 Press the [ ] and [ ] buttons to select “ADVANCED SETTING” and press the

[ ] button.

The <NETWORK SET-ADVANCED> screen appears. The cursor moves to “ADDRESS SET”.

“DVR NAME” displays the name set for the digital video recorder when using remote control software.

When “ADDRESS SET” has been set to “MANUAL”, it will be possible to set “DVR NAME” using this menu.

4 Press the [ ] button, and then use

the [ ], [ ], and [ ] buttons to set “ADDRESS SET”.

[Settings] (‹ indicates initial setting.)

Setting	Description
‹AUTO	When either the VA-SW81LITE or VA-SW814
	remote operation software is used, the digital
	video recorder’s [STILL] button can be pressed
	to have the IP address set automatically.
MANUAL	The “DVR NAME”, “IP ADDRESS” and “SUB NET
	MASK” are set on the digital video recorder.

5 When “MANUAL” has been set, set “DVR NAME”, “IP ADDRESS”, and

“SUB NET MASK” using the [ ], [ ], and [ ] buttons.

zRefer to “Setting passwords” on P. 36 for more information regarding setting methods for “DVR NAME”.

6 Press the [EXIT/OSD] button.

The display returns to the normal screen.

zWhen a new IP address is set using the digital video recorder, it will become valid upon leaving the <RS-485/ NETWORK/REMOTE SET> screen.

zWhen connecting the digital video recorder to a network, check the IP address with the network administrator.

The set IP address is displayed in the <RS-485/ NETWORK/REMOTE SET> screen.

RS-485 connections and settings

Connect the digital video recorder’s RS-485 (A, B) control terminals in series to the system controller, digital video recorder or similar device.

[MENU] button [ ] button [ ] button

[ ] button [EXIT/OSD] button

1 Press the [MENU] button.

The MENU indicator lights, and the <MAIN MENU> screen appears.

2 Select “6. RS-485/NETWORK/REMOTE

SET”, and press the [ ] button.

The <RS-485/NETWORK/REMOTE SET> screen appears.

(1)

(2)

(3)

(4)

(5)

SETTINGS

40 English