7

COPYING TO CF CARDS OR CD-R/RW DISCS AND FORMATTING

[MENU] button

[

] button

[

] button

[

] button

 

 

 

 

 

 

[EXIT/OSD] button

 

 

 

 

 

 

CompactFlash

 

 

 

 

 

 

card reader

CompactFlash card

[ ] button

Use the following procedure to copy image recordings to a CompactFlash card, a CD-R/RW. CompactFlash cards and CD-RWs can also be formatted as described below.

CD-R/RW drive

CD-R/RW

2 Press the [] and [] buttons to select

“COPY SET” and press the [] button.

The <COPY SET> screen appears.

z

Do not turn off the power while image is being copied.

z Data is written to CD-R/RWs using single-session recording.

 

Once data has been written, therefore, it will not be possible

 

to add additional data to a disc, even if free space is available.

z When a large amount of data is to be copied, it can be

 

divided between a number of different cards or discs of

 

the same type.

z Cards and discs cannot be formatted while copying.

 

Prepare cards or discs with sufficient memory in advance.

 

 

 

 

 

 

 

 

 

 

 

 

(2)

(4)

(1)

(3)

(5)

(6)

(7)

z The digital video recorder can automatically detect

whether the copy destination is a CompactFlash card or

a CD-R/RW disc.

Copying image

Connect either a CompactFlash card reader or a CD-R/RW drive to the USB port on the front of the digital video recorder.

For information on CompactFlash card readers and CD-R/RW drives that can be connected, contact the dealer or Sanyo service centre.

1 Press the [SEARCH] button while the digital video recorder is recording, stopped, or a still image is displayed.

The <SEARCH/COPY> screen appears.

(1)RECORDING TOP:

Displays the date/time of the image recorded first.

(2)RECORDING END:

Displays the date/time of the image recorded last (i.e., the newest image).

(3)COPY SIZE:

Displays the amount of data between “START TIME” and “END TIME” in MB.

If this data is less than 1 MB in size, “-----” is displayed and “COPY START” will not be possible.

(4)START TIME:

Specifies the date/time for the start of copying.

(5)END TIME:

Specifies the date/time for the end of copying.

A date and time earlier than “START TIME” cannot be specified.

(6)COPY START:

Starts copying when selected.

(7)Preview:

Displays the image corresponding to the date/time set by “START TIME” or “END TIME”.

English

21

Page 22
Image 22
Sanyo DSR-M manual Copying image, Preview