VIDEO CASSETTE TAPES
Correct tape thread check function
If the correct tape thread check function is on, after the cassette tape is loaded, a mechanism will operate for about 12 seconds to check that the tape has been threaded (loaded) correctly and the cassette indicator “o” will blink during that period. If the tape is not loaded properly, the cassette will be ejected.
NOTES:
œThis function checks to make sure that the cassette has been correctly loaded. It is recommended to use this function to make sure the recordings are conducted reliably.
œIf during the tape thread check operation, the REC, PLAY, FF, REW or STOP button is pressed, the command will only be executed after the tape thread has been checked. Only the EJECT button will operate while the tape thread is being checked.
œIf in the (VARIOUS SET 2) menu “TAPE IN MODE” is set to “REC”, the recording indicator “ m” will light while the tape thread is checked. However, recording will only start after the tape thread check is completed. To cancel recording, press the STOP button.
1Press the MENU button to display the (MAIN MENU 1) menu.
2Press the SHIFT ] button to select the “4. VARIOUS SET 1” line, then press the MENU button.
øThe (VARIOUS SET 1) menu appears.
@@@@<VARIOUS@SET@1>
*THREAD@CHECK@@@@Y
*REMOTE@@@@@@@@@@EJECT
*EXT@TIME@ADJ.@@@01:00
*TAPE@END@OUT@@@@PRE
*EJECT@SET
@@EJECT@MODE@@@@@EJECT1
@@OPERATION@@@@@@SLAVE
3Press the DATA l (or j) button to set the desired mode.
Y. . . . . . . . . The correct tape thread check function is on
N. . . . . . . . . The correct tape thread check function is off
4Press the MENU EXIT button to save the setting.
Setting the Action to Take When a Cassette is Loaded
You can set the mode the VCR will go into when a cassette is loaded.
1Press the MENU button to display the (MAIN MENU 1) menu.
2Press the SHIFT ] button to select the “5. VARIOUS SET 2” line, then press the MENU button.
øThe (VARIOUS SET 2) menu appears.
@@@@<VARIOUS@SET@2>
*TAPE@IN@MODE@@@@STOP
*VIDEO@LOSS@@@@@@Y
*REC@SPEED@@@@@@@N
*CLOG@DETECT.@@@@Y
*SERIES@REC@IN@@@N
*MX@@@@@@@@@@@@@@SANYO
3Press the DATA l (or j) button to set the desired mode.
STOP . . . . . . Stays in stop mode
REC . . . . . . . Goes into recording mode
4Press the MENU EXIT button to save the setting.
English | 17 |
