Alarm Search, Alarm Scan | Sanyo DTL-4800 manual

ALARM RECORDING

Alarm Search

To go to the beginning of a desired alarm recording.

1Press the SEARCH button during stop mode.

ø“AL SEARCH 01” will be displayed on screen.

2Press the DATA l (or j) button to set the desired alarm number (1 to 99), then press the FF (or REW) button.

øThe alarm search will start.

øPlayback will start just before the desired alarm recording, then switch to a still image at the beginning of the desired alarm recording.

NOTE:

œThe alarm number is relative to the actual tape position. (Please refer to the illustration below.)

						Playback
		Alarm number 2				1			1	2
	Alarm		input point
		trigger
		trigger
			Rewind direction						Fast-forward direction

						Actual position
						Actual position

3Press the PLAY button.

øPlayback will start.

NOTE:

œIf during a search the end of the tape is reached, the tape will rewind and stop. If the beginning of the tape is reached, it will stop.

Alarm Scan

To look for an alarm recording by viewing the first 5 seconds of each alarm recording.

1Press the SEARCH button twice during stop mode.

ø“AL SCAN” will be displayed on screen.

2Press the FF (or REW) button.

øThe unit will advance (or rewind) the tape at high speed and playback the first 5 seconds of every alarm recording.

NOTES:

œThe playback of a block which includes the alarm recording will start.

œThe playback will continue until the first 5 seconds of the alarm recording are played back.

øTo cancel the alarm scan mode, press the STOP button.

3While the desired recording is being played back, press the PLAY button.

øPlayback will start, alarm scan mode is cancelled.

NOTE:

œIf during a scan the end of the tape is reached, the tape will rewind and stop. If the beginning of the tape is reached, it will stop.

English

29

Image 30

Sanyo DTL-4800 instruction manual Alarm Search, Alarm Scan

Contents

Digital Precautions For the customers in CanadaDeclaration of Conformity Precautions Contents FeaturesAccessories STILL/PAUSE button Locations of Controls and IndicatorsFront Panel Search FRAME/FIELD button Eject button Menu Exit button Operation Mode Indicator Locations of Controls and IndicatorsOperation Indicators Digital Display OFF indicator Back Panel Male on the VCR O P Q R S T Installing the Ni-Cd Battery Protection against power failureConnections Power Cord Installation About the memory resetConnections ON-SCREEN Menus Main menusSub-menus ON-SCREEN Menus Clock Setting Setting the Language and ClockLanguage Setting Day of week is set automatically Setting the Language and Clock Automatic Daylight Saving Time Adjustment Changing the ON-SCREEN Display Selecting the On-screen DisplayChanging the Date/Time Display Position Video Cassette Tapes Correct tape thread check function Setting the Action to Take When a Cassette is LoadedVideo Cassette Tapes Various SET 1 menu appears If no tape management data is present on the tape Tape Management FunctionOperation If tape management data is present on the tape Setting the Tape Management Function Tape Management FunctionTape Management menu appears Tape Management Conflict Display Conflict display sample Normal Recording Recording speed mode is displayed on the digital displayPause/Still indicator N blinks Normal Recording Before starting Field Recording Speed ModeNormal Recording Hour Concerning the Number of Times Tapes can be Rerecorded on Recording CheckClog Detection Setting the Mode at the End of the Tape Action to Take when the Video Signal DeterioratesRecord SET menu appears Changes to the Recording Speed Mode During Recording Setup for use with a multiplexer Repeat indicator will light Autorepeat RecordingAutorepeat Recording Alarm Recording Alarm Recording Setting Connections to the Alarm IN/OUT Terminals Alarm RecordingAlarm Recording Counter Display Alarm Reset in terminal Alarm Search Alarm Scan Pre Alarm Recording Setting Post Alarm Recording SettingRecording speed mode Recording duration Seconds Program Timer Recording Program Timer Recording Press the Data l or j button to select Y To Cancel a Program Timer Recording Setting the HolidaysChanging a Program Timer Recording To Cancel all Program Timer Recordings These portions will not be recorded Recording Using AN External Timer Input Connections Using a Multiplexer Trigger Shot Recording SetupTrigger Shot Recording Series Recording Series Recording SetupRecording will start in series recording mode Series recording connections Continous Loop Recording Setup Series RecordingLoop recording connection example with 2 VCRs Playback Search Forward and Reverse Tape CounterPlayback Field Advance Forward and Reverse DAY/TIME Search Day/Time SearchD Search 01 000000 will be displayed on screen Cancel the Security Lock Setting the Security LockSetting the Security Lock Setting and Canceling the Quick Method Security Lock Setting the Buzzer If using the SET UP setting, continue with steps 4Buzzer SET menu appears Clock Adjustment Setting procedure on the first VCR is now completed Eject terminal connection Setting the Cassette Eject ModeCassette Eject Setup Eject in terminal SW No Setup for RS-232C or RS-485 USEDIP Switches Setup Example RS-485 RJ-11 connector layout Setup for RS-232C or RS-485 USESetup for RS-232C or RS-485 Use RS-485 Connection RS-232C 9-pin connector layout Pin Signal Operation Signal directionPOWER/DEW/USED Time menu appears Tape END OUT Terminal Timer OUT TerminalOutput Terminals COM Terminal Remote Jack Remote control settingOutput Terminals NON REC OUT terminal Maintenance Maintenance Maintenance TableMaintaining and Checking The Mechanism Troubleshooting Guide After a Power FailureSystem Down Specifications Sanyo Industrial VCR Warranty Weekdays 830 AM 500 PM Pacific Time RD2QD/NA