Sharp AR-FX13 appendix Setting UP the Machine for USE with a PC Modem, 15FAX Signal RCV

INITIAL SETTINGS

SETTING UP THE MACHINE FOR USE WITH A PC MODEM

The machine is set to automatically begin reception if you pick up from an extension telephone and the machine detects a fax tone. However, if you are using a modem on the same line, you must deactivate this function: otherwise the machine will mistakenly attempt to receive the transmission from your computer. To turn off the Fax Signal Receive function, follow the procedure below.

Warning

If you turn off the Fax Signal Receive function, be sure to activate the Remote Reception function. See USING THE REMOTE RECEPTION FUNCTION"on page 38 for details on how to do this.

1 Press the [MENU] key.5 Press the [OK] key.

SP. FUNC	SP. FUNC	2
2 Press the [ ] key ( ) or [ ] key ( )	6 Press the [MENU] key.
until "4:USER PROGRAM" appears,
and then press the [OK] key.	Press the [MENU] key to
	exit.

Selection

SP. FUNC

"4:USER PROGRAM"

3 Press the [] key () or [] key () until "15:FAX SIGNAL RCV" appears, and then press the [OK] key.

Selection

"15:FAX SIGNAL RCV"

4 Press the [] key () or [] key () to select "1:ON" or "2:OFF".

SP. FUNC

37