Sharp AR-FX13 Setting the Number of Recall Times, When the line is busy, 8RECALL Times Busy

INITIAL SETTINGS

SETTING THE NUMBER OF RECALL TIMES

The machine will automatically reattempt transmission when a transmission is not successful because the line is busy or a communication error occurs. This setting is used to select the number of recall attempts that will be made.

• If a transmission is still not successful after the set number of recall attempts is made, a report will

Note print and the document will be cleared from memory.

•If a communication error occurs because the memory becomes full during transmission, no recall attempts will be made.

•Recall attempts for a direct transmission will only be made when the SPF/RSPF is used. Recall attempts will not be made when the document glass is used.

•When the machine is waiting to make a recall attempt for a direct transmission, other operations such as storing a transmission or selecting a function cannot be performed.

When the line is busy

You can select the number of recall attempts made when the line is busy.				2
If "00" is entered, the machine will not make any recall attempts.
1	Press the [MENU] key.	5	Press the [OK] key.
	SP. FUNC		SP. FUNC
2	Press the [ ] key ( ) or [ ] key ( )	6	Press the [MENU] key.
	until "4:USER PROGRAM" appears,
	and then press the [OK] key.		Press the [MENU] key to
			exit.

Selection

SP. FUNC

"4:USER PROGRAM"

3 Press the [] key () or [] key () until "8:RECALL TIMES BUSY" appears, and then press the [OK] key.

Selection

"8:RECALL TIMES BUSY"

4 Press the numeric keys to select the number of recall attempts.

Enter the number of recall times ("00" to "10").

31