Sanyo DVW-7100a Clock Set Up, To Select a Channel To Preset the Channel Again, To exit

H9680UD_EN/SP.qx3 04.8.10 4:26 PM Page 10

To Select a Channel To Preset the Channel Again

4 CLOCK SET

You can select a channel by directly entering channel using the Number but- tons on the remote control.

Notes for using the Number buttons:

•When selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.(For example: 117, press 1,1,7)

•You must precede single-digit channel numbers with a zero (For example: 02, 03, 04 and so on).

1)Press the MENU button until the main menu appears.

2)Select "CHANNEL SET UP" by pressing the K or L button. Then, press the B but- ton.

3)Select "AUTO SET UP" by pressing the

K or L button. Then, press the B button. After scanning, the tuner stops on the low- est memorized channel.

To Change the On-Screen Language

	MONTH DAY		YEAR
	1 0	/ 0 1	2 0 0 4
or	HOUR MINUTE		AM/PM
	– –	: – –	– –

Select the current year.

5 CLOCK SET

To Add/Delete Channels

1	- M E N U -
	MENU

TIMER PROGRAMMING

AUTO REPEAT [OFF]

B CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

1)Press the MENU button until the main menu appears.

2)Select "LANGUAGE SELECT" by press- ing the K or L button. Then, press the B button.

3)Select "ENGLISH" , "FRANCAIS" or "ESPAÑOL" by pressing the K or L but- ton. Then, press the CLEAR/C.RESET button.

	MONTH DAY		YEAR
	1 0	/ 0 1 FRI	2 0 0 4
or	HOUR MINUTE		AM/PM
	0 5	: – –	– –
	Select the current hour.

Setup

or

2

or

3

or

•If the clock is not set, the CLOCK SET screen appears when you press the MENU button. In this case, press the MENU button again.

CHANNEL SET UP

AUTO SET UP

BMANUAL SET UP

MANUAL SET UP

CHANNEL 30 (CATV)

ADD

Select the channel to be added or deleted.

Hint

•If you accidentally select Spanish or French and need English: Press the MENU button and choose SELEC.

IDIOMA, or SELECTION LANGUE. Press the B button, and select ENGLISH. Finally, press the CLEAR/C.RESET button.

Clock Set Up

		VCR
	VCR	Press the VCR button first.
1	MENU	- M E N U -

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

BCLOCK SET LANGUAGE SELECT

• If the clock is not set, the

or

CLOCK SET screen appears when you press the MENU button. In this case, go to step [2].

2	CLOCK SET
MONTH DAY		YEAR
1 0	/ – –	– – – –
or

6		CLOCK SET
	MONTH DAY		YEAR
	1 0	/ 0 1 FRI	2 0 0 4
or	HOUR MINUTE		AM/PM
	0 5	: 4 0	– –

Select the current minute.

7		CLOCK SET
	MONTH DAY		YEAR
	1 0	/ 0 1 FRI	2 0 0 4
or	HOUR MINUTE		AM/PM
	0 5	: 4 0	P M AM

B PM

Select “AM” or “PM”.

8To exit the CLOCK SET screen

4		MANUAL SET UP
		CHANNEL 30	(CATV)
	or	DELETE
		Select “ADD” or “DELETE”.

5 To exit the	CLEAR
menu	C.RESET

	HOUR MINUTE		AM/PM
	– –	: – –	– –
	Select the current month.
3		CLOCK SET
	MONTH DAY		YEAR
	1 0	/ 0 1	– – – –
or	HOUR MINUTE		AM/PM
	– –	: – –	– –

Select the current day.

Hint

•To go back one step, press the s button (during the steps [2] to [7]).

•Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds.

Need help? Call 1-800-813-3435

– 10 – EN