Sanyo KMS1872, KMS2472 service manual Setting the Timer, How to set the present time

Setting the Timer

NOTE

In the descriptions below, the following settings are used for the temperature and time indicator selector button on the bottom front section of the remote control.

•Temperature: °F

•Time: AM, PM

1.How to set the present time

(Example) To set to 10:30 pm.

	Operation	Indication
1.	Press the CLOCK button once if	The time indication alone flashes.
	the time indicator is not flashing.
2.	Press the Advance, Return ( ,	The time can be set in 1-minute
	) button until PM 10:30 is	increments. Holding down the button
	displayed.	advances the time rapidly in 10-minute
		increments.
3.	Press the CLOCK button again.	This completes the setting of the
		current time.

2.How to set the OFF time (Example) To stop the air conditioner at 11:00 am.

1.Press the OFF TIME setting button once.

2.Press the Advance, Return (,

) button until AM 11:00 is displayed.

3.Wait a few seconds, and then the setting is complete.

The timer indication is displayed, and the present OFF time is shown.

The timer indication blinks. The time can be set in 10-minute increments. Holding down the button advances the time rapidly in 10-minute increments.

The timer indication stops blinking and the present time is displayed.

OI-807-17-EG 17