To unmount indoor unit
Press the 2 ▲ marks on the lower part of the indoor unit and unlatch the tabs. Then lift the indoor unit and unmount. (Fig. 42)
a)The drain hose should be slanted downward to the outdoors. (Fig. 43)
b)Never form a trap in the course of the hose.
c)If the drain hose will run in the room, insulate the hose with insulation* so that chilled condensation will not damage furniture or floors. (Fig. 44)
*Foamed polyethylene or its equivalent is recom- mended.
Push
Fig. 42
WARNING
Do not supply power to the unit or operate it until all tubing and wiring to the out- side unit are completed.
Slant |
Indoor |
Drain |
Risk of Electric Shock
unit |
hose |
Fig. 43
Condensation
Insulation material (Locally purchased) must be used.
Fig. 44
15
