Network PIN code setting, Whats PJLink? | Sanyo PLC-XE33 specs

Initial setting

Network PIN code setting

This is to set the Network PIN code to restrict the access from an unauthorized person through the network.

Enter a 4-digit number as the Network PIN code onto the text box and click Set button. The projector begins restarting and it takes

about 10 seconds. Close (Quit) the web browser and access to the login page again in 10 seconds. This is to perform the login authentication firmly.

The default Network PIN code [0000] means no Network PIN code is set.

✐When you connect the projector to the network, it is recommended to set a new Network PIN code. Only a four-digit number is valid for the Network PIN code.

PJLink and password setting

This is to set the PJLink password authentica- tion on or off. If set "On" with the PJLink pull- down menu, the password must be required. Enter a password* onto the text box and click Set button.

✐1 to 32 alphanumeric characters can be used for the password.

What's PJLink?

The projectors equipped with PJLink function can be used together on the same network, regardless of model or brand, for centralized control and monitoring. This standard was established by the Japan Business Machine and Information System Industries Association (JBMIA). Please visit the Website at http://pjlink.jbmia.or.jp/english/.

PJLink Notice

The projector is compliant with PJLink Standard Class 1 of JBMIA, and it supports all com- mands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.

	Projector Input		PJLink Input	Parameter
	Computer 2	RGB	RGB 1	11
	Computer 2	RGB	RGB 1	11		ENGLISH
	Computer 1	RGB	RGB 2	12		ENGLISH
	Computer 1	RGB	RGB 2	12
		Component	RGB 3	13
		S-video	RGB 4	14
		RGB (Scart)	RGB 5	15
		RGB (Scart)	RGB 5	15
	Video	Video	VIDEO 2	22

23

Image 23

Sanyo PLC-XE33 owner manual Network PIN code setting, PJLink and password setting, Whats PJLink?, PJLink Notice

Contents

Network Set-up and Operation Wired Setting Projector Set-up and Operation Telephone No 818998-7322 ComplianceFederal Communications Commission Notice Address Safety instructions Table of contents Chapter Web Management function +p.31 Features Required operating environment for computers Network specifications of the projector Trademarks Expression/AbbreviationUse of this manual Install the Software on computers Flow of installationConnect the LAN and set the configuration Network Configuration has completed Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Enter the IP address Login the setting page of the projectorLogin Setting Display of main settingMain setting page in the display Sub menu tab Switches the sub menu tab Main menu Example of the setting How to use the setting Select items by ticking on check boxes Select an item by selecting a radio button Password for PJLink function +p.23 Initial settingSets the Network PIN code to login the setting page +p.23 Switches PJLink password authentication on or off +p.23 Whats PJLink? Network PIN code settingPJLink and password setting To 32 alphanumeric characters can be used for the password Sets Dhcp or Manual Network configurationDisplays the selected LAN mode Abnormality Mail settingSetting Smtp server and administrator address Sets server name or IP address of the Smtp server Option Registering and deleting E-mail addressesOption selection for sending alert mail Up to 10 E-mail addresses can be registered Check / Delete Examples Type and contents of alert mail When lamp corres. value reaches preselect use time When PJ lamp replacement time is reached Snmp setting Click Set button if you tick or un-tick the check box on a Up to 99,999 hours can be set for the time settingTrap check/delete Chapter Controlling the Projector PJ status Power control and status checkDisplays the status of the projectors power. Refer to next Popup confirmation window Status Description About projector condition Input Control Item Description System Suppresses the sound. ON, OFF Sound Image mode Video Computer Image adjustment PC adjustment Screen mode Video Computer Normal True Wide Full Custom Setting up the projectorScreen setting Setting Highland mode Projector or Remote control. OFFProjector keys, Remote control Normal mode Status InformationIndication of the lamp status Items Description Chapter Appendix To another network Examples of connectionPeer-To-Peer connection Entrance hall Gateway Router installed in the network Use the IP address assigned to the projector Use of telnetControl Command Function Proxy setting Web browser settingActive Script/JavaScript enable Internet Explorer Examples OS/BrowsersWindows XP Professional Proxy setting Netscape Navigator JavaScript Setting Safari MAC OS X v How can I restrict access from the computer Why doesn’t the setting page appear in my web browser? How can I install several projectors? Why am I not receiving E-mail alert messages? Why cant be turned on/off with web browser? What are the rules for IP address assignment? What is the MAC address assigned to the projector? Can I update the firmware of the projector SO-KR5AC