Mail setting, Abnormality | Sanyo PLC-XE33 manual

E-mail setting

E-mail setting

This projector has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-mail Setting on the main

menu and follow the below steps.

Item	Description

SMTP server*1	Sets server name or IP address of the SMTP server
Administrator ....address Sets e-mail address of administrator
Add address	Sets e-mail address of the user to send mail when the projector has an
	abnormality.

1Setting SMTP server and administrator address

Set the server name or IP address of the SMTP server*1 and administrator address. The administrator address is set to "Reply-To" address of the message sent from the projec-

tor.

*1 The SMTP server is a server for sending E-Mail. Please contact your network administrator to have this SMTP server address.

✐If the projector sends an alert message due to the abnormality on the projector but the SMTP server is down in some other reason, the message will not be sent. In this case, the message "Unable to connect to server." will be displayed on the setting page. To clear this message, set up SMTP server address again.

✐To use the E-Mail function, it must be set the DNS address on the Network setting page correctly.

✐You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your net- work environment.

✐The projector does not send message to the address set in "Administrator address" text box. If you want to send e-mails to the administrator address, enter the administrator address into "Add address" text box.

ENGLISH

25

Image 25

Sanyo PLC-XE33 owner manual Mail setting, Setting Smtp server and administrator address, Abnormality

Contents

Network Set-up and Operation Wired Setting Projector Set-up and Operation Federal Communications Commission Notice ComplianceAddress Telephone No 818998-7322 Safety instructions Table of contents Chapter Web Management function +p.31 Features Required operating environment for computers Network specifications of the projector Use of this manual Expression/AbbreviationTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Install the Software on computers Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu Setting Example of the setting How to use the setting Select items by ticking on check boxes Select an item by selecting a radio button Sets the Network PIN code to login the setting page +p.23 Initial settingSwitches PJLink password authentication on or off +p.23 Password for PJLink function +p.23 PJLink and password setting Network PIN code settingTo 32 alphanumeric characters can be used for the password Whats PJLink? Displays the selected LAN mode Network configurationSets Dhcp or Manual Setting Smtp server and administrator address Mail settingSets server name or IP address of the Smtp server Abnormality Option selection for sending alert mail Registering and deleting E-mail addressesUp to 10 E-mail addresses can be registered Check / Delete Option Examples Type and contents of alert mail When lamp corres. value reaches preselect use time When PJ lamp replacement time is reached Snmp setting Trap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkPopup confirmation window PJ status Status Description About projector condition Input Control Item Description System Suppresses the sound. ON, OFF Sound Image mode Video Computer Image adjustment PC adjustment Screen setting Setting up the projectorScreen mode Video Computer Normal True Wide Full Custom Setting Projector keys, Remote control Projector or Remote control. OFFNormal mode Highland mode Indication of the lamp status InformationItems Description Status Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Entrance hall Gateway Router installed in the network Control Use of telnetUse the IP address assigned to the projector Command Function Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting Netscape Navigator JavaScript Setting Safari MAC OS X v How can I restrict access from the computer Why doesn’t the setting page appear in my web browser? How can I install several projectors? Why am I not receiving E-mail alert messages? Why cant be turned on/off with web browser? What are the rules for IP address assignment? What is the MAC address assigned to the projector? Can I update the firmware of the projector SO-KR5AC