Chapter 3 Basic Setting and Operation

When PJ lamp replacement time is reached:

TITLE: Message from projector

Projector Model Name: model name

TCP/IP: 192.168.1.201 Projector Name: Proj05

It sends you following message.

*The projector lamp has reached replacement time. Lamp ON 2000 h

Replace it with a new lamp immediately and reset the lamp counter. If the projector is used without resetting the lamp counter, the alert mail is sent to users in every power- on of the projector. This alert mail will not be sent when unchecking the mail sending condition "When PJ lamp replacement time is reached".

When lamp corres. value reaches preselect use time:

TITLE: Message from projector

Projector Model Name: model name

TCP/IP: 192.168.1.201 Projector Name: Proj05

It sends you following message.

*The accumulated lamp use time has reached 2000 hours.

28

Page 28
Image 28
Sanyo PLC-XE33 owner manual When PJ lamp replacement time is reached, When lamp corres. value reaches preselect use time