Flow of installation | Sanyo PLC-XE33 guide

Flow of installation

Flow of installation

To use the projector via the networks, follow the setup procedures below.

STEP 1 Connect the LAN and set the configuration.

Decide depending on the LAN environment.

➔“2. Setup Procedures” (pp.11–16).

Detailed LAN configurations need to be done with a browser later.

First, complete the Wired LAN connection between computers and projec- tors, then start browser configurations.

➔“3. Basic setting and operation” (pp.17–30).

STEP 2 Network Configuration has completed.

Follow each chapter to operate the projector.

■Operate and manage the projector ➔ “4. Controlling the projector”(pp.31-42)

➔“Power Control and status check”(p.32)

➔“Control”(p.34)

➔“PC adjustment”(p.38)

➔“Setting up the projector”(p.39)

➔ “Projector information”(p.42)

STEP 3 Install the Software on computers.

Install the software recorded in CD-ROM on each computer which will be operated. Refer to the owner's manual of PJ Network Manager.

Notice about installing Software CD-ROM

It is available for controlling and setting of the projector by using the web browser without installing any software. So it is not required to install the software into your computer.

For PJ Network Manager function, it is required to install the software. Please see the own- er's manual of "PJ Network Manager Function".

ENGLISH

Image 9

Sanyo PLC-XE33 Flow of installation, Connect the LAN and set the configuration, Network Configuration has completed

Contents

Network Set-up and Operation Wired Setting Projector Set-up and Operation Federal Communications Commission Notice ComplianceAddress Telephone No 818998-7322 Safety instructions Table of contents Chapter Web Management function +p.31 Features Required operating environment for computers Network specifications of the projector Expression/Abbreviation Use of this manualTrademarks Connect the LAN and set the configuration Flow of installationNetwork Configuration has completed Install the Software on computers Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login the setting page of the projector LoginEnter the IP address Main setting page in the display Display of main settingSub menu tab Switches the sub menu tab Main menu Setting Example of the setting How to use the setting Select items by ticking on check boxes Select an item by selecting a radio button Sets the Network PIN code to login the setting page +p.23 Initial settingSwitches PJLink password authentication on or off +p.23 Password for PJLink function +p.23 PJLink and password setting Network PIN code settingTo 32 alphanumeric characters can be used for the password Whats PJLink? Network configuration Displays the selected LAN modeSets Dhcp or Manual Setting Smtp server and administrator address Mail settingSets server name or IP address of the Smtp server Abnormality Option selection for sending alert mail Registering and deleting E-mail addressesUp to 10 E-mail addresses can be registered Check / Delete Option Examples Type and contents of alert mail When lamp corres. value reaches preselect use time When PJ lamp replacement time is reached Snmp setting Up to 99,999 hours can be set for the time setting Trap check/deleteClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Displays the status of the projectors power. Refer to next Power control and status checkPopup confirmation window PJ status Status Description About projector condition Input Control Item Description System Suppresses the sound. ON, OFF Sound Image mode Video Computer Image adjustment PC adjustment Setting up the projector Screen settingScreen mode Video Computer Normal True Wide Full Custom Setting Projector keys, Remote control Projector or Remote control. OFFNormal mode Highland mode Indication of the lamp status InformationItems Description Status Chapter Appendix Examples of connection Peer-To-Peer connectionTo another network Entrance hall Gateway Router installed in the network Use of telnet ControlUse the IP address assigned to the projector Command Function Web browser setting Active Script/JavaScript enableProxy setting Examples OS/Browsers Windows XP ProfessionalInternet Explorer Proxy setting Netscape Navigator JavaScript Setting Safari MAC OS X v How can I restrict access from the computer Why doesn’t the setting page appear in my web browser? How can I install several projectors? Why am I not receiving E-mail alert messages? Why cant be turned on/off with web browser? What are the rules for IP address assignment? What is the MAC address assigned to the projector? Can I update the firmware of the projector SO-KR5AC