LOREX Technology L19WD Series Appendix 10 Connecting PTZ Cameras, Installing a PTZ Camera

L19WD Series

Appendix 10: Connecting PTZ Cameras

You can connect PTZ cameras (not included) to the PTZ Control Block on the rear panel of the system. You can configure the PTZ Cameras in the Camera Menu of the system. Additional PTZ Cameras are available at www.lorexcctv.com

Installing a PTZ Camera:

1.Connect the Transmit Cable to the TX port of the PTZ block on the rear panel.

2.Connect the Receive Cable to the RX port of the PTZ block on the rear panel.

3.Connect the PTZ camera to a BNC Channel.

4.From the System Main Menu, click and then click PTZ to configure the camera.

Note: The PTZ camera settings depend on the Type of Camera - refer to the specific Camera Manual for your brand and model of PTZ Camera.

POWER

DC12V

ETHERNETPS/2

CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8

ALARM IN		RELAY		PTZ	RS-232	CH9
1 2 3 4 G 5 6 7 8 G 9 10 11 12 G 13 14 15 16	G NO COM NC		D+ D-		G TX RX

CH10 CH11 CH12 CH13 CH14 CH15 CH16

AU1	AU2	AU3	AU4	AU OUT MONITOR	SPOT
CH1-4	CH5-8	CH9-12	CH13-16

PTZ CAMERA (Not Included)

73