LOREX Technology L19WD Series instruction manual Using the Motion Cells, Select

Appendix 5: Setting Up Motion Recording

Using the Motion Cells

You can further configure Motion Detection to have the system record only when movement is detected in a specific area of the camera image. Use this feature to mask certain areas, such as windows and doors.

You can also set the motion cells to remove certain areas from detection, such as a heavy traffic area, or a constantly moving piece of machinery.

To configure Motion Cell Setup:

Mouse:

1.Right-click on the screen to open

Motion Cell grid.

2.Click and drag across the screen to set a specific motion sensitive area. Select and Clear buttons pop-up.

Note: Active cells are clear; inactive cells are solid grey.

Small grey squares indicate selected squares when clicking & dragging.

To verify that motion is active, move your hand in front of the camera – the active cells turn green.

3.Click CLEAR to disable motion sensitivity to the selected cells. Disabled cells turn solid grey.

4.If cells are disabled, click and drag on cells you wish to activate and click

SELECT.

5.Right-click anywhere on the screen to return to the MOTIOM SETUP MENU.

6.Click OK to save your settings, or click DEFAULT to restore factory defaults.

68