LOREX Technology L19WD Series instruction manual Appendix 5 Setting Up Motion Recording

L19WD Series

Appendix 5: Setting Up Motion Recording

When you first power on the system, it automatically starts recording in continuous mode. You may wish to change this setting to better suit your security needs. One option is to have the cameras only record when they detect motion.

You can set Motion Detection for groups of four cameras according to an hourly schedule. Use the Motion Cell grid to apply motion detection to a specific area of the image.

To set up motion recording:

Mouse:

1.Click the ◄► to select a group of channels (number varies depending on your system).

2.Click for Motion Recording.

3.Click one of the tiles in the table according to the day and hour(s) you want to motion recording For example, if you wanted Motion recording from midnight to 6 AM, Monday-Friday:

i.Click .

ii.Click and drag across the table from tile “MON-0”to tile “FRI-5.”The selected area turns purple to indicate Motion recording is enabled from 12 AM to 6 AM, Monday- Friday.

4.Click OK to save your settings.

Continuous & Motion

This system had an advanced recording feature where both Continuous and Motion recording can be active at the same time:

•The system records continuously, but when it detects motion, it displays an “M” on the pertinent channel.

•The event is logged as Motion in the system archive.

•This is useful in situations where you want continuous recording, but also want to track events for convenient and faster searching.

67