LOREX Technology L19WD Series instruction manual Display Setup, Interval

L19WD Series

Display

Open the Display menu from the System Control Panel to set graphical displays during Live view and Playback, and edit settings for the Digital Information Display (DID).

DISPLAY SETUP

Check the boxes to turn graphical displays in Live mode and Playback on/off.

INTERVAL

Set the time intervals for Sequence Mode (SEQ), Picture-In-Picture (PIP), and Spot Monitor. You can also set the timeout for the on-screen menu. A short timeout means any on-screen menus will disappear quickly without user input; a longer timeout means menus will remain on-screen longer.

•DATE/TIME – Shows the date and time in the lower left corner.

•CHANNEL STATUS– The active status for each of the cameras: Continuous, Motion, Alarm, or Panic.

•TOTAL STATUS– Show the percentage of the hard drive currently in use. Also shows the active Audio Channel.

To change time intervals:

Mouse:

•CAMERA TITLE– Display the name of the camera channels.

Click OK to save your settings, or click DEFAULT to restore factory defaults.

1.Click the arrows to adjust the time interval (in seconds) for SEQ, PIP, and Spot Monitor.

2.Click the drop-down menu to adjust the timeout of the on-screen menu.

Remote Control:

1.Press ◄►to select between SEQ, PIP, and Spot Monitor, then press ▲▼to change the time increment.

2.Press ◄►to select the drop-down menu, and then press OK to select a time interval for the menu timeout.

Click OK to save your settings, or click DEFAULT to restore factory defaults.

37