L19WD Series
Backup / Upgrade
Upgrade system firmware and backup data to a USB flash drive.
UPGRADE | USB BACKUP |
New firmware is periodically available for download from the Lorex website (www.lorexcctv.com). You can update the firmware on the unit via the USB port on the front panel.
To upgrade the system’s firmware:
1.Download the latest firmware for your system from www.lorexcctv.com to your PC and copy the file to a USB flash drive.
2.Insert the USB flash drive into the front panel of the system.
3.From the System Control Panel click 
and click UPGRADE.
4.Click FIRMWARE UPGRADE for the system to detect the USB flash drive.
5.Click START. The Firmware Upgrade will take a few moments; the progress bar shows the status of the upgrade.
6.Once the upgrade is complete, click OK and exit the menu.
7.Disconnect and then reconnect the power cord from the back panel to reset the system.
Archive recorded data from the system by connecting an external USB flash drive.
Note: Make sure you have deleted all data from the USB drive. The system will format the USB drive, erasing all data, in preparation for the archive process.
To backup data via USB:
1.Connect an external USB flash drive to the front panel of the system.
2.From the System Control Panel, click 
and click USB BACKUP. You must enter your username and password.
3.Under BACKUP START TIME, enter the date and time for the start of backup.
4.Under BACKUP END TIME, enter the End Time for the conclusion of backup.
5.Click SELECT for the system to determine the total size of backup.
Note: If the size of backup data is larger than the space on the USB drive, End Time will be adjusted automatically.
6.Click START to begin backup. When the backup finishes, exit the window and remove your USB device.
47
