Setting | Sanyo PLC-XE33 manual

Chapter 4 Controlling the Projector

Setting 1

Item	Description

Language	Sets the language display of projector's
Auto setup	on-screen display menu.
	Executes the Auto PC Adj, and Input
	Search function below according to the
	each setting after clicking Start button.
Auto PC Adj	Sets Auto PC Adjustment mode. (ON,
	OFF)
Input search	Sets the auto-input signal detection
	mode. (ON1, ON2, OFF)
Auto keystone	Sets Auto Keystone mode. (Auto, Manual,
Background	OFF)
	Sets the screen background when no signal input. (Blue, User, Black)
Display	Switches on or off the on-screen menu display on the screen. (OFF, Countdown Off,
	ON)
Logo	Countdown off........Displays image during the starting up.
	Sets on or off the logo display on the screen during the startup. (OFF, Default, User)

Setting 2

Item	Description

Ceiling	Sets the image top/bottom and left/
Rear	right reversed. (ON, OFF)
	Sets the image left/right reversed. (ON,
Terminal	OFF)
	Sets the COMPUTER IN 2/MONITOR OUT
Power	terminal to COMPUTER 2 or Monitor Out.

management	Sets into the selected power manage-
	ment mode (Ready, Shutdown, OFF) if
	the input signal is interrupted and no
	control key is pressed for the specified
	period of time.
On start	*The specified time can be set 1 to 30 min.
	Sets the power-on mode when the AC cord is connected to the outlet.
Lamp control	Selects lamp control mode. (High, Normal, Eco)
Lamp life
control	Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds
	the recommended total hours of use.

40

Image 40

Sanyo PLC-XE33 owner manual Setting

Contents

Wired Setting Projector Set-up and Operation Network Set-up and Operation Compliance Federal Communications Commission NoticeAddress Telephone No 818998-7322 Safety instructions Table of contents Chapter Features Web Management function +p.31 Network specifications of the projector Required operating environment for computers Use of this manual Expression/AbbreviationTrademarks Flow of installation Connect the LAN and set the configurationNetwork Configuration has completed Install the Software on computers Preparation Setup Procedures Connecting to the LAN line Description Network PIN code Network factory default Wired LAN factory default settings Chapter Basic Setting and Operation Login Login the setting page of the projectorEnter the IP address Display of main setting Main setting page in the displaySub menu tab Switches the sub menu tab Main menu Setting How to use the setting Example of the setting Select an item by selecting a radio button Select items by ticking on check boxes Initial setting Sets the Network PIN code to login the setting page +p.23Switches PJLink password authentication on or off +p.23 Password for PJLink function +p.23 Network PIN code setting PJLink and password settingTo 32 alphanumeric characters can be used for the password Whats PJLink? Displays the selected LAN mode Network configurationSets Dhcp or Manual Mail setting Setting Smtp server and administrator addressSets server name or IP address of the Smtp server Abnormality Registering and deleting E-mail addresses Option selection for sending alert mailUp to 10 E-mail addresses can be registered Check / Delete Option Examples Type and contents of alert mail When PJ lamp replacement time is reached When lamp corres. value reaches preselect use time Snmp setting Trap check/delete Up to 99,999 hours can be set for the time settingClick Set button if you tick or un-tick the check box on a Chapter Controlling the Projector Power control and status check Displays the status of the projectors power. Refer to nextPopup confirmation window PJ status About projector condition Status Description Control Input System Item Description Sound Suppresses the sound. ON, OFF Image adjustment Image mode Video Computer PC adjustment Screen setting Setting up the projectorScreen mode Video Computer Normal True Wide Full Custom Setting Projector or Remote control. OFF Projector keys, Remote controlNormal mode Highland mode Information Indication of the lamp statusItems Description Status Chapter Appendix Peer-To-Peer connection Examples of connectionTo another network Gateway Router installed in the network Entrance hall Control Use of telnetUse the IP address assigned to the projector Command Function Active Script/JavaScript enable Web browser settingProxy setting Windows XP Professional Examples OS/BrowsersInternet Explorer Proxy setting JavaScript Setting Netscape Navigator MAC OS X v Safari Why doesn’t the setting page appear in my web browser? How can I restrict access from the computer How can I install several projectors? Why cant be turned on/off with web browser? Why am I not receiving E-mail alert messages? What is the MAC address assigned to the projector? What are the rules for IP address assignment? Can I update the firmware of the projector SO-KR5AC